With Optional Equipment

CD/MD Changer

You can control up to 7 CD and MD changers with this unit.

If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you play back a CD-TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select the

CD or MD.

2 Press (MODE) until the desired changer appears.

CD/MD playback starts.

When a CD or MD changer is connected, all the tracks play from the beginning.

Changing the displayed item

Each time you press (DSPL) during CD, CD- TEXT disc or MD playback, the item changes as follows:

$

Elapsed playback time

$

Disc name*1/Artist name*2

$

Track name*3

$

Clock

*1 If you have not labeled the disc or there is no disc name prerecorded on the MD, “NO D.Name” appears in the display.

*2 If you play a CD-TEXT disc, the artist name appears in the display after the disc name. (Only for CD-TEXT discs with the artist name)

*3 If the track name of a CD-TEXT disc or MD is not prerecorded, “NO T.Name” appears in the display.

You can label a personalized name for CDs and CD-TEXT discs with the disc memo function, refer to “Labeling a CD” (page 19).

Tip

If the name of the MD or CD-TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then

(1)(N).

Automatically scrolling a disc name

— Auto Scroll

If the disc name/artist name or track name on a CD-TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD or CD- TEXT disc.

If you press (DSPL) to change the display item, the disc or track name of the MD or CD- TEXT disc is scrolled automatically whether you set the function on or off.

1 During playback, press (SHIFT).

2 Press (2) (SET UP) repeatedly until “A.Scrl” appears.

3 Press (4) (n) to select “A.Scrl on.”

4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in step 2 above.

Note

For some CD-TEXT discs with extremely many characters, the following cases may happen:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Displaying the recording date of the current MD

Press (DSPL) for two seconds during MD playback.

The recording date of the track is displayed for about three seconds.

Locating a specific track

—Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) once for each track you want to skip.

To locate succeeding tracks

To locate preceding tracks

EN

Changer Functions/CD/MD Other

15