Sony CDX-C760 Locating a disc by name

The display item will change depending on the setting as follows:

Type of	Priority display	Actual display
disc	setting
A	Disc MEMO	Disc memo
	TEXT name	CD-TEXT information
B	Disc MEMO	Disc memo
	TEXT name
C	Disc MEMO	CD-TEXT information
	TEXT name
D	Disc MEMO	NO D.Name
	TEXT name

A: CD-TEXT disc with disc memo

B: Normal CD with disc memo

C: CD-TEXT disc without disc memo

D: Normal CD without disc memo

*2 If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you playback a CD- TEXT disc.

Erasing the disc memo

EN	1	Press (SOURCE) repeatedly to select CD.
	2	Press (MODE) repeatedly to select the CD
		changer.
	3	Press (LIST) for two seconds.
	4	Press (DSPL) for two seconds.
	5	Rotate the dial to select the name you
		want to erase.
	6	Press (5) (ENTER) for two seconds.
		The name is erased.
		Repeat steps 5 and 6 if you want to erase
		other names.
	7	Press (LIST) for two seconds.
		The unit returns to normal CD playback
		mode.

Locating a disc by name

—List-up (CD changer with the custom file function or MD changer)

You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 19).

1 Press (LIST) momentarily.

The name assigned to the current disc appears in the display.

LST	DISC
SUR EQ	￿1 SCHUBERT
	ENTER

If you add disc memo labels to a CD-TEXT disc, the display setting you make will determine which information is displayed. If the disc has only one set of information (either CD-TEXT or disc memo labels), that information will be displayed regardless of the display setting you make.

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

•After a disc name has been displayed for five seconds, the display goes back to normal playback mode. To turn off the display, press (DSPL).

•The track names are not displayed during MD playback.

•If there are no discs in the magazine, “NO Disc” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

•The information appears only in upper case. There are also some letters which cannot be displayed (during MD playback).

20