Sony CDX-C760 Listening to each program source in its registered surround menu, Changing the line output level, Adjusting the volume of the bass and treble

Adjusting the volume of the bass and treble

You can adjust the volume of the bass and treble to best fit the acoustic characteristics inside your car.

1 Press (SOURCE) to select a source (tuner,

CD or MD).

2 Press (SOUND) repeatedly until “BAS” or “TRE” appears.

3 Rotate the dial to adjust the volume.

After three seconds, the display goes back to normal playback mode.

Adjusting the turn-over frequency

You can adjust the bass and treble turn-over frequencies.

Turn-over frequency

Frequency (Hz)

1 Press (SOURCE) to select a source (tuner,

CD or MD).

2 Press (SOUND) for two seconds.

3 Press (SOUND) repeatedly until “BAS” or

“TRE” appears. Bass adjusting mode

4 Rotate the dial to select the turn-over frequency.

The turn-over frequencies change as follows:

Bass:

198 Hz n250 Hz n314 Hz* n396 Hz

Treble:

2.0 kHz n3.1 kHz* n4.0 kHz n5.0 kHz

*Factory-set frequency

5 Press (SOUND) for two seconds.

The display goes back to normal playback mode.

— Last Sound Memory (LSM)

You can listen to the same source always in the same surround menu even after changing the program source or turning the unit on and off again.

Changing the line output level

You can change the line output level if you hear distortion or other noise.

1 Press (SHIFT), then press (2) (SET UP) until “L.OUT” appears.

2 Press (4) (n) to select the desired setting (–10 dB or –16 dB).

3 Press (SHIFT).

DSP