• LOCATION OF CONTROL (CDX-GT260/GT260S)
Location of controls and basic operations
Main unit
12 3 | 4 | 5 | 6 | 7 8 |
OFF
EQ
SEEK
DIM
DSPL
PUSH SELECT
SOURCE
AUX
SEEK
MODE
| ALBM | REP | SHUF |
| PAUSE |
1 | 2 | 3 | 4 | 5 | 6 |
9 q; qa qs qd
Refer to the pages listed for details.
AOFF button
To power off; stop the source.
BEQ (equalizer) button 8
To select an equalizer type (XPLOD,
NATURAL, HARD, UPBEAT, VOCAL, CUSTOM or OFF).
CVolume control dial/select button 8
To adjust volume (rotate); select setup items (press and rotate).
DSOURCE button
To power on; change the source (Radio/CD/ AUX).
EDisc slot
To insert the disc (label side up). Playback starts automatically.
FDisplay window
GAUX input jack 9
To connect a portable audio device.
HZ (eject) button
To eject the disc.
I
(front panel release) button 4
JDSPL (display)/DIM (dimmer) button 7
To change display items (press); change the display brightness (press and hold).
| |
qf | qg |
KSEEK
CD:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
LMODE button 7
To select the radio band (FM/MW/SW).
MFrequency select switch (located on the bottom of the unit)
See “Frequency select switch” in the supplied installation/connections manual.
NNumber buttons
CD:
(1)/(2): ALBM
To skip albums (press); skip albums continuously (press and hold).
(3): REP 7
(4): SHUF 7
(6): PAUSE
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
OReceptor for the card remote commander
*When an MP3/WMA is played.
6
• CONNECTIONS (CDX-GT260/GT260S)
Connection example
Ejemplo de conexiones
9
