EGP*1/ALBM*2 +/– buttons*3
To select preset stations/skip groups (press); skip groups continuously (press and hold).
FMENU button
To enter menu.
GDisplay window
HBBE MP button 2, 10, 11
To activate the BBE MP function.
IOPEN button 5
JIMAGE button 2
To select the display image.
Movie mode
KDSPL (display) button 8
To change display item.
LENTER button
To complete a setting.
MSOURCE button
To power on/change the source (Radio/CD/ MD*5/AUX/SAT*6).
NMODE button 8, 15
To select the radio band (FM/AM)/select the unit*4.
ONumber buttons
Radio:
To receive stored stations (press); store stations (press and hold).
CD/MD*5:
(1): REP 8, 15
(2): SHUF 8, 15
(6): PAUSE*7
To pause playback. To cancel, press again.
PSCRL (scroll) button 8
To scroll the display item.
QHDEQ button 9, 10
To select an equalizer type (Flat, Xplod, Refined Vocal, Over Drive, Virtual Sub, Natural Cruise or Rear Drive)
RRESET button 4
S Z (eject) button 5
To eject the disc.
TDisc slot 5
To insert the disc.
The following buttons on the card remote commander have also different buttons/functions from the unit.
wa </, (SEEK
To control CD/Radio, the same as (SEEK)
ws VOL (volume) +/– button To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press again.
wf SOUND button To select sound items.
wg LIST/CAT*6 button 9, 16 To list up.
wh M/m
To control CD, the same as (GP/ALBM) +/– on the unit.
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is different, see page 15.
*4 When a CD/MD changer is connected.
*5 When an MD changer is connected.
*6 When the SAT tuner is connected.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 19.
7