Tuning automatically
1Select the band, then press (SEEK)
Scanning stops when the unit receives a station. Repeat procedure until the desired station is received.
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK)
Receiving a station through a list
— LIST
You can list up the frequency.
1Select the band, then press (MENU).
2Press (GP/ALBM) +/– repeatedly until “LIST” appears, then press (ENTER).
The frequency appears.
Enjoying your best sound
—
For easy setup, by selecting a preset, see “Setting X- DSP easily” (page 10).
For more precise adjustment, see “Optimizing your sound — Sound MENU” (page 11) and “Precisely adjusting your sound” (page 13).
Notes
•
•The degree of effect will depend on your vehicle type and its speakers.
3Press (GP/ALBM) +/– repeatedly the desired station appears.
4Press (ENTER) to receive the station.
The display returns to normal reception mode.
With the card remote commander
Select the band, then press (LIST). Press M or m repeatedly until the desired station appears, then
press (ENTER).
HDEQ
The independent four
Preset | Effect |
Xplod | Emphasizes overall dynamics |
| of the sound. |
|
|
Refined Vocal | Enriches and enhances vocals |
| up front. |
|
|
Over Drive | Creates a bright and lively |
| sound. |
|
|
Virtual Sub | Creates deep and solid bass |
| sound. |
|
|
Natural Cruise | Enhances sounds obscured by |
| road noise. |
|
|
Rear Drive | Enhances rear speaker sound. |
|
|
Flat | No effect |
|
|
Tip
See “HDEQ Tuning” (page 11) for customizing more precisely.
continue to next page t
9