Clearing display characters automatically

—AutoClear (Spectrum analyzer/Panorama/ Screen Saver mode)

You can make display characters disappear for a moment in Spectrum analyzer/Panorama/Screen Saver mode. When set to ON, you can display the display characters only when the disc, album, or track is changed or the source or display mode is changed. You can enjoy full images.

1 Press (SOURCE) to select a source (radio, CD, MD or AUX).

2 Press (GRAPHIC).

3 Press < or , repeatedly to select “AutoClear.”

Each time you press < or ,, the item changes as follows:

AutoClear y BlendLevel yPlaque y Color Sel yAutoImage y AutoClear

4 Press (ENTER).

5 Press (ENTER).

6 Press M or m to select “ON.”

To cancel the Auto Clear function, select “OFF.”

7 Press (ENTER).

8 Press (GRAPHIC).

The display returns to the normal display.

Note

In Standard/Clock mode, you cannot make the display characters disappear automatically.

Changing the translucence ratio of the characters

—BlendLevel (Spectrum analyzer/Panorama/ Screen Saver mode)

You can set the translucence ratio (Colour density) of the characters in the Spectrum analyzer/Panorama/Screen Saver mode.

By setting this level down, you can adjust the characters in the display to appear opaque.

1 Press (SOURCE) to select a source (radio, CD, MD or AUX).

2 Press (GRAPHIC).

3 Press < or , repeatedly to select “BlendLevel.”

Each time you press < or ,, the item changes as follows:

AutoClear y BlendLevel y

Plaque y Color Sel y

AutoImage y AutoClear

4 Press (ENTER).

5 Press (ENTER).

6 Press < or , to select the permeation ratio (Level 0-15).

The lower the level, the paler the display characters.

7 Press (ENTER).

8 Press (GRAPHIC).

The display returns to the normal display.

Notes

•In Standard/Clock mode, you cannot change the translucence ratio of the display characters.

•While “Plaque” is set to “ON,” “BlendLevel” has no effect, regardless of setting.

25