Setting the security code

This unit has a security function to discourage theft. Input a 4-digit number as your security code.

If you set it, you need to input the stored code to turn on the unit should you re-install the unit in another car or after changing the battery.

1 Press (MENU).

2 Press < or , repeatedly to select “Setup.”

3 Press (ENTER).

4 Press M or m repeatedly to select “Security.”

5 Press (ENTER).

Code Set display is displayed.

1Press M or m repeatedly to enter the first digit (0-9).

2Press , to move the cursor to the 2nd digit, then press M or m repeatedly to enter the 2nd digit. Each time you press M, a digit goes up and each time you press m, a digit falls.

3Repeat step 2 to enter the 3rd digit and the 4th digit.

6 Press (ENTER).

Check Code display appears.

7 Press M or m repeatedly to select “YES.”

8 Press (ENTER).

The display returns to the normal display.

Notes

•The security code cannot be entered by the number buttons (1-6).

•Make sure not to forget your security code.

•If you select “NO” in step 7 and press (ENTER), the display returns to the Code Set display in step 5.

After the security code setup is completed

Should you re-install the unit in another car or change the battery, the Check Code display appears after turning on the unit. Enter your stored 4-digit code with the cursor buttons (M/m/,), and press (ENTER).

Code Input display

OK: returns to the calendar/clock display.

NG: “CODE ERROR” message appears. Input the correct code using the cursor buttons.

Cancelling the security code

Repeat step 1 to 4 in “Setting the security code” (Code Del display appears). Enter your stored code with the cursor buttons (M/m/,), and press (ENTER).

Code Del display

OK: returns to a normal display.

NG: the “CODE ERROR” message appears. Input the correct code using the cursor buttons.

Note

You cannot change the security code unless you delete your stored code.

Tip

If the security code is not stored, the Code Del display does not appear.

35