Changing the operative direction

The operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SOUND) for 2 seconds while pushing the VOL control.

Note

If you press (SOUND) for 2 seconds while pushing the VOL control, “Normal” or “Reverse” appears in the display.

–“Normal” is to use the rotary commander at the factory-set position.

–“Reverse” is to use the rotary commander when it is mounted on the right side of the steering column.

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader, and subwoofer volume.

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (SOUND).3 Press < or , repeatedly to select the item you want to adjust.

Each time you press < or ,, the item changes as follows:

DSO y EQ7 y Bass y TrebleyBalance (left-right)yFader (front-rear)ySubWoofer (subwoofer volume)

4 Press (ENTER).

5 Adjust the selected item by pressing<or ,.

6 Press (ENTER).

Quickly attenuating the soundPress (ATT).

“ATT” appears in the display for a while.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

29