The name is deleted, and “Continue” appears if the other names are stored. If you want to delete other names, rotate the SEEK control dial to select “YES,” then repeat steps 4 to 6.

7Press (MENU).

The unit returns to normal play mode.

With the card remote commander

In steps 2 to 4: press M or m instead of the SEEK

control dial; in step 6: press < or , instead of the SEEK control dial.

Locating a disc by name — LIST

You can select a disc from the list when connecting a CD changer with the CUSTOM FILE function or an MD changer.

If you assign a name to a disc, the name appears on the list. For details on labelling a disc, see page 13.

1During playback, press (MENU).

2Rotate the SEEK control dial until “List” appears, then press (ENTER).

The disc number or disc name appears.

3Rotate the SEEK control dial until the desired disc appears.

4Press (ENTER) to play the disc.

The display returns to normal play mode.

With the card remote commander

During playback, press (LIST). Press M or m repeatedly until the desired disc appears, then press (ENTER).

Rotary commander RM-X4SAttaching the label

Attach the indication label depending on how you mount the rotary commander.

SOUND

DSPL

MODE

MODE

DSPL

SOUND

Location of controls

The corresponding buttons on the rotary commander control the same functions as those on this unit or the card remote commander.

 

ATT

 

 

SOUND

 

 

PRESET/

 

 

DISC

MODE

 

 

 

SOURCE

 

 

DSPL

OFF

14

 

VOL SEEK/AMS

OFF

 

The following controls on the rotary commander require a different operation from the unit.

•PRESET/DISC control

To control radio/CD, the same as M or m on card remote commander (push in and rotate).

•VOL (volume) control

The same as the volume control dial on the unit (rotate).

•SEEK/AMS control

To control radio/CD, the same as < or , on card remote commander (rotate, or rotate and hold).

Changing the operative direction

The operative direction of the controls is factory- set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

1While pushing the VOL control, press and hold (SOUND).

Auxiliary audio equipment

You can connect optional Sony portable devices to the BUS AUDIO IN/AUX IN terminal on the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers.

Note

When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, “AUX” cannot be selected with (SOURCE).

Tip

When connecting both a portable device and a changer, use the optional AUX-IN selector.

Selecting auxiliary equipment

1Press (SOURCE) repeatedly until “AUX” appears.

Operate by the portable device itself.

To adjust the volume level of auxiliary equipment, see “AUX Level” on page 12.