Error*1
•The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly.
•The disc cannot play because of some problem. t Insert another disc.
Failure
The connection of speakers/amplifiers is incorrect.
tSee the installation guide manual of this model to check the connection.
Load
The changer is loading the disc.
tWait until loading is complete.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO AF
There is no alternative frequency for the current station.
tRotate < or , while the station name is flashing. The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI Seek” appears).
NO Data
All custom names have been deleted, or none are stored.
NO Disc
The disc is not inserted in the CD/MD changer.
tInsert discs in the changer.
NO Disc Name
A disc name is not written in the track.
NO Group Name
A group name is not written in the track.
NO ID3 Tag
ID3 tag information is not written in the MP3 file.
NO Info
Text information is not written in the ATRAC3/ ATRAC3plus file.
NO Magazine
The disc magazine is not inserted in the CD changer.
tInsert the magazine in the changer.
NO Music
The disc is not a music file.
tInsert a music CD in this unit or MP3 playable changer.
NO TP
The unit will continue searching for available TP stations.
NO Track Name
A track name is not written in the track.
Not Read
The disc information has not been read by the unit.
tLoading the disc, then select it on the list.
Not Ready
The lid of the MD changer is open or the MDs are not inserted properly.
tClose the lid or insert the MDs properly.
Offset
There may be an internal malfunction.
tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.
Read
The unit is reading all track and group information on the disc.
tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.
Push Reset
The CD unit and CD/MD changer cannot be operated because of some problem.
tPress the RESET button (page 4).
“ 
” or “”
During
“s”
The character cannot be displayed with the unit.
*1 If an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display.
*2 The disc number of the disc causing the error appears in the display.
If these solutions do not help improve the situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.
20