GDSO button 2

To select the DSO mode (1, 2, 3 or off). The larger the number, the more enhanced the effect.

HOFF buttonTo power off/stop the source.ISEEK +/– buttonRadio:

To tune in stations automatically (press); find a station manually (press and hold).

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); fast-forward/ reverse a track (press and hold).

J (front panel release) button 4KSOURCE buttonTo power on/change the source (Radio/CD/ MD*1/AUX*2).LMODE button 8, 12To select the radio band (FM/MW/LW)/ select the unit*3.MRESET button (located behind the front panel) 4NNumber buttons

Radio:

To receive stored stations (press); store stations (press and hold).CD/MD*1:(1): REP 8(2): SHUF 8(5): BBE MP*4 2

To activate the BBE MP function, to set “BBE MP-on” during playback on this unit. To cancel, set “BBE MP-off.”

OAF (Alternative Frequencies)/TA (Traffic Announcement) button 9To set AF and TA/TP in RDS.PGP*5/PRESET –/+ buttons

To select preset stations/skip groups (press); skip groups continuously (press and hold).

QReceptor for the card remote commanderRDisc slot 5To insert the disc.SZ (eject) button 5To eject the disc.

The following buttons on the card remote commander have also different buttons/functions from the unit.

w; MENU buttonTo enter menu.wa ENTER buttonTo complete a setting.ws < (.)/, (>) buttonsTo control radio/CD, the same as (SEEK) +/– on the unit.wd DSPL (display)/PTY (Programme Type) button 8, 10, 13To change display items; to select PTY in RDS.wf LIST button 9, 13 To list up.wg M (+)/m (–) buttonsTo control radio/CD, the same as (GP/PRESET) –/+ on the unit.

*1 When an MD changer is connected.

*2 When an optional Sony portable device is connected.

*3 When a CD/MD changer is connected.

*4 The unit only.

*5 When an MP3/ATRAC CD is played and a changer is not connected. If the changer is connected, the operation is different, see page 12.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 16.

7