HDSO button 2
To select the DSO mode (1, 2, 3 or off). The larger the number, the more enhanced the effect.
I Z (eject) button 5
To eject the disc/open the shutter.
JM>/.m
CD:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
K
(front panel release) button 4
LSOURCE button
To power on; change the source (Radio/CD/ MD*1/AUX).
MMODE button 8, 12
To select the radio band (FM/MW/LW)/ select the unit*2.
NRESET button (located behind the front panel) 4
ONumber buttons
CD/MD*1:
(1)/(2): GP*3/ALBM*4
To skip groups/albums (press); skip groups/albums continuously (press and hold).
(3): REP 8, 12
(4): SHUF 8, 12
(5): BBE MP*6 3
To activate the BBE MP function, set “BBE MP on.” To cancel, set “BBE MP off.”
(6): PAUSE*6
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
PAF (Alternative Frequencies)/TA (Traffic Announcement) button 9
To set AF and TA/TP in RDS.
QSENS/BTM button 8
To improve weak reception: LOCAL/MONO (press); start the BTM function (press and hold).
RPTY (Programme Type) button 10
To select PTY in RDS.
SDSPL (display) button 8
To change display items.
TReceptor for the card remote commander
UOFF button
To power off; stop the source.
The following buttons on the card remote commander have also different buttons/functions from the unit.
ws < (.)/, (>) buttons
To control CD/radio, the same as the
M>/.m control on the unit.
wd VOL (volume) +/– button
To adjust volume.
wf M (+)/m
To control CD, the same as (2)/(1) on the unit.
wg SCRL (scroll) button 8
To scroll the display item.
wh Number buttons
To receive stored stations (press); store stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA is played.
*5 If the changer is connected, the operation is different, see page 12.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 15.
7