Note
Be sure to create the ATRAC CD using authorized software, such as SonicStage 2.0 or later, or SonicStage Simple Burner 1.0 or 1.1, which are supplied with Sony Network products.
If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.
2Engage the release keys together with the protection collar.
Maintenance |
| Orient the release |
| keys as shown. | |
| 3Pull out the release keys to remove the | |
|
| |
Fuse replacement |
| protection collar. |
When replacing the fuse, be |
|
|
sure to use one matching the |
|
|
amperage rating stated on the |
|
|
original fuse. If the fuse |
|
|
blows, check the power |
|
|
connection and replace the |
|
|
fuse. If the fuse blows again |
|
|
after replacement, there may |
| 2 Remove the unit. |
be an internal malfunction. In |
| |
such a case, consult your | Fuse (10A) | 1Insert both release keys simultaneously |
nearest Sony dealer. |
| |
| until they click. | |
|
|
The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 4) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.
Hook facing inwards.
2Pull the release keys to unseat the unit.
Main unit | Back of the front panel |
3Slide the unit out of the mounting.
Notes
•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.
•Never touch the connectors directly with your fingers
or with any metal device.
Removing the unit |
|
|
| Specifications | |
1 Remove the protection collar. |
|
|
| CD Player section | |
|
| |
1Detach the front panel (page 4). |
| |
|
| Frequency response: 10 – 20,000 Hz |
|
| Wow and flutter: Below measurable limit |
12