Local Link function (UK only)

This function enables you to select other local stations in the area, even if they are not stored on your number buttons.

1During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2Within 5 seconds, press again a number button of the local station.

Repeat this procedure until the local station is received.

Selecting PTY

1Press (PTY) during FM reception.

The current programme type name appears if the station is transmitting PTY data.

2Press (PTY) repeatedly until the desired programme type appears.

3Press (SEEK) +/–.

The unit starts to search for a station broadcasting the selected programme type.

With the card remote commander

In step 2, to select the programme type, press M or m.

Type of programmes

NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Popular Music), ROCK M (Rock Music), EASY M (Easy Listening), LIGHT M (Light Classical), CLASSICS (Classical), OTHER M (Other Music Type), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s Programmes), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary)

Note

You cannot use this function in countries/regions where no PTY data is available.

Setting CT

1Set “CT-ON” in setup (page 9).

Notes

•The CT function may not work even though an RDS

station is being received.

8 • There might be a difference between the time set by the CT function and the actual time.

Other functionsChanging the sound settings
Adjusting the sound characteristics — BAL/FAD

You can adjust the balance and fader.

1Press (SEL) repeatedly until “BAL” or “FAD” appears.

The item changes as follows:

LOW* t MID* t HI* t

BAL (left-right) t FAD (front-rear)

*When EQ3 is activated (page 8).

2Press the volume +/– button repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press <, M, , or m.

Adjusting the equalizer curve
— EQ3

You can adjust and store the equalizer settings for different tone ranges.

1Select a source, then press (EQ3) repeatedly to select the EQ3 type.

2Press (SEL) repeatedly until “LOW,” “MID” or “HI” appears.

3Press the volume +/– button repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold (SEL) before the setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

With the card remote commander

In step 3, to adjust the selected item, press <, M, , or m.