SIRIUS Tuner

Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this system, be sure to connect the AC power adaptor supplied with the tuner to a wall socket. For detail, see “Receiving the SIRIUS Satellite Radio” (page 17).

Keep the SiriusConnect Home tuner, antenna, and AC power adaptor away from the speaker cords and the power cord to avoid picking up noise.

XM antenna

Connect the XM MiniTuner and Home Dock. For details, see “Receiving the XM Satellite Radio” (page 16)

Speakers

Power

Connect the power cord to a wall socket. If the supplied adaptor on the plug does not fit your wall socket, detach it from the plug (only for models equipped with an adaptor).

Inserting two R6 (size AA) batteries into the remote

Slide and remove the battery compartment lid, and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

TipGetting

new ones.

With normal use, the batteries should last for

 

about six months. When the remote no longer

 

operates the system, replace both batteries with

 

 

Started

Attaching the speaker pads

 

 

 

Attach the supplied speaker pads at each corner on the bottom of the speakers to stabilize the speakers and to prevent them from slipping.

When carrying this system

Perform the following procedure to protect the DVD mechanism.

Use buttons on the unit for the operation.

1Press /to turn on the system, then press DVD .

2Make sure that no disc is loaded in the system and check that “No Disc” appears.

3Press /to turn off the system and check that “STANDBY” disappears.

4Unplug the power cord.

Continued

15GB