Tuner

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to FM or AM

1 Press FUNCTION +/repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND on the unit repeatedly to select “FM” or “AM”).

2 Press and hold TUNING +/until the frequency indication changes and then release.

Scanning stops automatically when a station is tuned in and “TUNED” lights up in the display. When a FM stereo program is tuned in, “ST” lights up in the display.

If “TUNED” does not appear and the scanning does not stop, press TUNING +/repeatedly to tune in the station you want.

3 Adjust the volume.Press VOLUME +/.

To stop automatic scanning

Press .
To change the AM tuning intervalThe factory setting for AM tuning interval is 9 kHz (or 10 kHz for same areas).Use buttons on the unit.1Press TUNER/BAND on the unit repeatedly to select “AM”.2Press /to turn off the system.3Press DISPLAY to display the clock.

4While the clock is displayed, hold down TUNER/BAND and then press /to turn on the system.

“AM 9k Step” or “AM 10k Step” appears in the display.When you change the interval, all the AM preset stations are erased.

Tips

To improve broadcast reception, adjust the supplied antennas, or connect an external antenna.

When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” lights up in the display. There will be no stereo effect, but the reception will improve.

Listening to satellite radio

You can operate and listen to XM or SIRIUS satellite radio by connecting an optional antenna or tuner. Before using the system, connect the XM Mini-Tuner and Home Dock or the SiriusConnect Home tuner to the system. See “Hooking up the system” (page 14) for details about connection.

1 Select “XM” or “SIRIUS.”Press XM or SIRIUS (or TUNER/ BAND repeatedly).

48GB