BLACK LEVEL (COMPONENT OUT)

Select the black level (setup level) for the video signals output from the COMPONENT VIDEO OUT jacks. You cannot select “BLACK LEVEL (COMPONENT OUT)” when the system outputs progressive signal.

OFF: Standard level

ON: Raise the standard black level. Use this when the picture becomes too black.

4:3 OUTPUT3)

Change this setting to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format (525p/625p) compatible TV, change the setting on your TV.

FULL: Select this when you can change the aspect ratio on your TV. NORMAL: Select this when you cannot change the aspect ratio on your TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image.

16:9 aspect ratio TV

1)The default setting varies depending on the country or region.

16:9

4:3 LETTER BOX

4:3 PAN SCAN

2)Depending on the DVD VIDEO, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.

3)This setting is effective only when

you set “TV TYPE” in “SCREEN SETUP” to “16:9.”

“P AUTO” or “P VIDEO” is selected (page 18).

Setting playback options CUSTOM

SETUP

Set up playback related and other settings.PAUSE MODE

(DVD VIDEO and DVD-R/-RW in VR mode only)

AUTO: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME: The picture, including subjects that do not move dynamically, is output in high resolution.

46GB