SIRIUS

ANTENNA

The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna.

ACQUIRING

The receiving condition is not good. Try moving the antenna to another location. For details about the antenna location, see the instructions supplied with the SiriusConnect Home tuner.

Call 888–539–SIRIYou have not subscribed for the selected channel.CHECK SIRIUS

The SiriusConnect Home tuner is not connected properly. Check all the connections, and then turn the system on again. Also make sure if the AC adaptor supplied with the SiriusConnect Home tuner is connected to a wall socket.

Invalid

You have entered an invalid channel number. The channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good.

SUB UPDATED

You have not subscribed for SIRIUS or the channel is not authorized. You need to subscribe for SIRIUS.

UPDATING

Channel information or SiriusConnect Home tuner firmware is being updated.

– – – – – –

There is no text information or time information in the channel. This is not an error. The text information may not be displayed depending on the system condition, for example, right after the system has received a channel.

Precautions

Discs that this system CANNOT play

Discs of non-standard shape (for example, heart, square, star)

Discs that have adhesive tape, paper, or sticker attached to them

Rental or used discs with attached seals where the glue extends beyond the seal

Discs that have labels printed using ink that feels tacky when touched

Notes on discs

Before playing, wipe the disc with a cleaning

cloth from the center out to the edge.

 

Do not clean discs with solvents, such as

 

benzine thinner, or commercially available

 

cleaners or anti-static spray intended for

 

vinyl LPs.

 

 

Do not expose discs to direct sunlight or heat

 

sources such as hot air ducts, nor leave it in a

Additional

car parked in direct sunlight.

 

Do not use discs encircled with a protection

 

ring. This may cause a malfunction to the

 

system.

 

On operating voltage

Information

Before operating the system, check that the

operating voltage of the unit is identical with

 

the voltage of your local power supply.

 

On safety

 

The unit is not disconnected from the

 

AC power source (mains) as long as it is

 

connected to the wall socket, even if the unit

 

itself has been turned off.

 

Completely disconnect the power cord

 

(mains lead) from the wall socket (mains)

 

if it is not going to be used for an extended

 

period of time. When unplugging the unit,

 

always grip the plug. Never pull the cord

 

itself.

 

Should any solid object or liquid get into

 

the system, unplug the system, and have

 

it checked by qualified personnel before

 

operating it again.

 

The AC power cord can be changed only by a

 

qualified service facility.

 

Continued

75GB