Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 5).
1 Prepare the sound source you want to play.
•CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 7).
•TUNER: Tune in a radio station (see “Listening to the radio” on page 9).
2 Press VOL +/– repeatedly (or turn VOLUME on the unit) to adjust the volume.
3 Press CLOCK/TIMER SET repeatedly until “ON” and “0:00” appear.
4 Set the time to start playback.
Press ./>repeatedly to set the hour, then press CLOCK/TIMER SET.
The minute indication flashes.
Press ./>repeatedly to set the minute, then press CLOCK/TIMER SET.
5 Press CLOCK/TIMER SET repeatedly until “OFF” and “0:00” appear.
6 Set the time to stop playback following the same procedure as step 4.
7 Press ./> depending on the sound source you want to play.
Each time you press the button, the display changes as follows:
Tu y Cd
8 Press ?/1 to turn off the system.
Other operations
To | Do this |
Check the setting | Press CLOCK/TIMER |
| SELECT repeatedly. |
|
|
Change the setting | Start over from step 1. |
|
|
Cancel the timer | Press CLOCK/TIMER |
| SELECT repeatedly until |
| “OFF” appears, then press |
| CLOCK/TIMER SET. |
|
|
Notes
•If you use the Daily Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
•Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time).
•If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated.
•You cannot use the system’s tape deck and the optional component connected to MD IN jacks as sound sources for the Daily Timer.