Demagnetising the tape heads

Demagnetise the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetising cassette. For details, refer to the instructions of the demagnetising cassette.

Specifications

Main unitAmplifier sectionAUDIO POWER SPECIFICATIONS: (U.S.A. model only)

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6-ohm loads, both channels driven, from 120 - 10,000 Hz; rated 10 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output.

North American model:

Continuous RMS power output (reference): 10 + 10 W

(6 ohms at 1 kHz, 10% THD)

European model:

DIN power output (rated): 7 + 7 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 10 + 10 W

(6 ohms at 1 kHz, 10% THD)

Music power output (reference):

20 + 20 W

Other models:

The following measured at AC 230 V or AC 120 V, 50/ 60 Hz

DIN power output (rated): 7 + 7 W

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference): 10 + 10 W

(6 ohms at 1 kHz, 10% THD)

Inputs

MD IN (phono jacks):

Sensitivity 500 mV, impedance 47 kilohms

Outputs

PHONES (stereo minijack):

Accepts headphones with an impedance of 8 ohms or more

SPEAKER:Accepts impedance of 6 to 16 ohms.

20GB