Hooking up the system (continued)
7Attach the system to the supplied desktop stand.
Make sure to grasp the main unit, and not the speakers.
After attaching the system to the stand, push down on the system to make sure they are securely fastened to the stand.
8Attach the supplied rear cover to the stand.
Put the wires through the holes at the bottom of the rear cover.
9Connect the power cord to a wall outlet.
If the plug does not fit the wall outlet, attach the supplied plug adaptor (only for models equipped with an adaptor).
To turn on the system, press @/1.
Using the system with the speakers detached
1 Connect one end of the supplied joint connector to the speaker cord, and then connect the supplied cord extension to the other end of the joint connector.
2 Connect the cord extensions to the SPEAKER jacks.
3 Secure the cord extensions with the speaker cord hooks at the bottom of the main unit. Otherwise, the cord extension could be damaged.
4 Attach the system to the supplied desktop stand.
5 Attach the supplied rear cover to the stand.
6 After folding up the speaker legs, set the speakers at the desired positions.
Notes
•Either mount both speakers or remove both speakers. Do not use the system with only one speaker mounted.
•When moving the system, first detach the main unit from the desktop stand, and then move the system. If you leave the speakers attached during the move, make sure to grasp the system by the main unit, and not by the speakers.
8GB