Sony CMT-L1 Labelling a CD, 13GB, — Disc Memo, continued, To add a character, 4 Enter a character, To cancel labelling, To erase and change a character

Tips

•The program you made remains after Program Play finishes. To play the program again, switch the function to CD, and then press CD u(or CD N on the remote).

•“--.--” appears when the total program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over.

Labelling a CD

— Disc Memo

You can label up to 100 CDs with titles of up to 20 symbols and characters. Whenever you load a labelled CD, the title appears in the display.

Note

When labelling CDs for the first time, be sure to erase all disc titles using the procedure “Erasing a disc title” on page 14.

1 Press FUNCTION repeatedly until “CD” appears in the display.

If “SHUFFLE” or “PROGRAM” appears in the display, press PLAY MODE/TUNING MODE repeatedly until both disappear.

2 Press NAME EDIT/SELECT on the remote.

The cursor starts flashing.

3 Press NAME EDIT/SELECT on the remote repeatedly to select the desired type of character.

Type of character	Select
Uppercase letters/blank	Selected AB.
space/symbols

Lowercase letters/blank	Selected ab.
space/symbols

Numbers	Selected 12.

4 Enter a character.

Type of		Do this
character

Uppercase or		Press the corresponding letter
lowercase		button on the remote repeatedly
letters		until the character to be entered
		flashes, or press the button once
		and press .or >
		repeatedly. And then press
		CURSORton the remote.

Numbers		Press the corresponding numeric
		button on the remote.

Blank space		Press 10/0 on the remote.

Symbols (‘ – / Press number 1 on the remote
, . ( ) : ! ?)		repeatedly.

Symbols (& +		Press number 1 on the remote,
< > _ = ” ; # $		and then press .or >
% @	`)	repeatedly. And then press
		CURSORton the remote.

5 Repeat steps 3 and 4 to enter the rest of the name.

6 Press ENTER/YES on the remote to complete the labelling procedure.

To erase and change a character

In step 3 or 4, press TCURSOR or

CURSORton the remote repeatedly until the character you want to change flashes, press CLEAR on the remote to erase the character, and then repeat steps 3 and 4.

To cancel labelling

Press MENU/NO on the remote.

To add a character

After step 2, press TCURSOR or

CURSORton the remote repeatedly to move the cursor to the place where you want to add a character. And then proceed to step 3.

continued