Preparing the remote

Pull out the insulating sheet to allow power to flow from the battery.

The remote already contains a battery.

Using the wall hanging

bracket

You can hang the system on the wall using the supplied wall hanging bracket.

The screws for attaching the wall hanging bracket to the wall are not supplied. When installing the bracket by yourself, be sure to use screws appropriate for the type of wall. Sony cannot take responsibility for any damages or injury due to installation.

Safety precautions

•The supplied bracket is for use with the Sony Interior Hi-Fi Component System CMT-L1 only. Using this item for purposes other than to hang the system on the wall may result in accidents.

•The component system CMT-L1 (7.1 kg) and the wall hanging bracket (0.6 kg) have a combined weight of 7.7 kg. Therefore, for safety reasons, the bracket should be attached securely to a wall made from materials capable of supporting a load of 50 kg or more.

•When you hang the system on the wall, make sure the left and right speakers are both attached or both detached. Attaching one speaker without the other may cause the system to drop and injure someone.

Preparation

•The screws for attaching the wall hanging bracket to the wall are not supplied. Be sure to purchase screws suited to the wall materials.

•If the wall materials cannot support a load of 50 kg or more, be sure to reinforce the wall.

Hanging the system on the wall

1 Fix the wall hanging bracket to the wall using 8 screws (not supplied).

Started Getting

Note

Be sure to secure the bracket in a level position.

2 Set the speaker cord into the speaker cord groove at the bottom of the speaker. Otherwise, the speaker cord could be damaged.

3 Attach the speakers.

Afterwards, push down on the speakers to make sure they are securely fastened to the main unit.

4 Connect the speaker cords to the SPEAKER jacks.

5 Attach the system to the wall hanging bracket which you have fixed to the wall. Make sure to grasp the main unit, and not the speakers.

After attaching the system to the bracket, push down on the system to make sure they are securely fastened to the bracket.

9GB