5Press TUNER MEMORY.

The preset number flashes. Perform steps 6 and 7 while the preset number flashes.

Preset number

6Press + or – (or TUNING + or – on the unit) repeatedly to select the desired preset number.

7Press ENTER.8Repeat steps 4 through 7 to store other stations.

Notes

•When tuning in a DAB station, it may take a few seconds before you hear any sound.

•Before you can receive DAB, you must complete the DAB Automatic Scan procedure (see “Scanning DAB stations” on page 13).

•You cannot preset the service component while “TUNED” is not displayed (DAB only).

Tip

Press TUNING MODE to stop scanning (FM/AM bands only).

Manual tuning preset (FM/AM bands only)

You can manually tune in and store the radio frequency of the desired stations.

1Press TUNER/BAND (or FUNCTION repeatedly) to switch the function to

TUNER.

2Press TUNER/BAND repeatedly to select “FM” or “AM”.

3Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.

4Press + or – (or TUNING + or – on the unit) repeatedly to tune in the desired station.

5Press TUNER MEMORY.

6Press + or – (or TUNING + or – on the unit) repeatedly to select the desired preset number.

7Press ENTER.

8Repeat steps 4 through 7 to store other stations.

Other operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset (FM/

 

AM bands only)” (page 14).

 

 

Set another station

After step 5, press + or – (or

to the existing

TUNING + or – on the unit)

preset number

repeatedly to select the preset

 

number you want to store the

 

station.

 

 

14GB