Press ?/1 to turn on the unit.
Press CLOCK/TIMER SET.
Inserting two R6 (size AA) batteries into the remote

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.

Setting the clock

Use buttons on the remote for the operation.

1

2

3 Press . or > repeatedly to set the hour.4 Press ENTER.5 Press . or > repeatedly to set the minute.6 Press ENTER.

The clock starts working.

To adjust the clock

1Press CLOCK/TIMER SET.

2Press . or > repeatedly to select “CLOCK SET?”, then press ENTER.

3Do the same procedures as step 3 to 6 above.

Note

The clock is not displayed in Power Saving Mode (page 22).

Started Getting

9GB