Power
Connect the power cord to a wall socket. If the supplied adaptor on the plug does not fit your wall socket, detach it from the plug (only for models equipped with an adaptor).
Attaching the speaker pads
Attach the supplied speaker pads at each corner on the bottom of the speakers to stabilize the speakers and to prevent them from slipping.
Getting
Inserting two R6 (size AA) batteries into the remote
Slide and remove the battery compartment lid, and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
When carrying this system
Perform the following procedure to protect the DVD mechanism.
Use buttons on the unit for the operation.
1Press /to turn on the system, then press DVD .
2Make sure that no disc is loaded in the system and check that “No Disc” appears.
3Press /to turn off the system and check that “STANDBY” disappears.
4Unplug the power cord.
Started