On heat buildup

Heat buildup on the unit during operation is normal and is not cause for alarm.

Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.

Do not obstruct the ventilation holes.

On the speaker system

The front speaker is magnetically shielded and can be installed near a TV. Color irregularity may still be observed, however on some types of TV screens. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. Place the right speaker on the right side of the unit and the left speaker on the left side of the unit. If there is no improvement, move the speakers far away from the TV.

IMPORTANT NOTICE

Caution: If you leave a still video image or on-screen display image displayed on your TV for an extended period of time via this system, you risk permanent damage to your TV screen. Projection TVs are especially susceptible to this.

Cleaning the cabinet

Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.

Specifications

Main unit

Amplifier section

DIN power output (rated)

40 W + 40 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference)

50 W + 50 W (6 ohms at 1 kHz, 10% THD)

Inputs:

AUDIO IN (stereo mini jack): Voltage 620 mV, impedance

47kilohms MIC (mini jack):

Sensitivity 0.8 mV, impedance

10kilohms

(USB) port:

Type A, maximum current 500 mA Outputs:

DIGITAL OUT (square optical connector jack):

Wavelength 660 nm VIDEO OUT (phono jack):

Max. output level 1 Vp-p, unbalanced, Sync. negative load impedance

75ohms

COMPONENT VIDEO OUT: Y: 1 Vp-p, 75 ohms Pb/Cb: 0.7 Vp-p, 75 ohms Pr/Cr: 0.7 Vp-p, 75 ohms

S VIDEO OUT (4-pin/mini-DIN jack):

Y: 1 Vp-p, unbalanced, Sync. negative

C: 0.286 Vp-p, load impedance

75ohms

PHONES (stereo mini jack):

accepts headphones of 8 ohms or more

94GB