Setting the clock

Use buttons on the remote to set the clock.

1 Press /to turn on the system.

2 Press TIMER MENU .

The hour indication flashes in the display.

If “PLAY SET?” flashes in the display, press or repeatedly to select “CLOCK SET?,” then press ENTER .

3 Press or repeatedly to set the hour.

4 Press ENTER .

The minute indication flashes in the display.

5 Press or repeatedly to set the minutes.

6 Press ENTER .

The clock starts functioning.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

To display the clock when the system is off

Press DISPLAY .

The clock is displayed for about 8 seconds.

Started Getting

23GB