Tuner
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to FM or AM
1 Press FUNCTION +/ repeatedly to select “TUNER FM” or “TUNER AM” (or press TUNER/ BAND on the unit repeatedly to select “FM” or “AM”).
2 Press and hold TUNING +/ until the frequency indication changes and then release.
Scanning stops automatically when a station is tuned in and “TUNED” lights up in the display. When a FM stereo program is tuned in, “ST” lights up in the display.
If “TUNED” does not appear and the scanning does not stop, press TUNING +/repeatedly to tune in the station you want.
When you tune in a station that provides RDS services, the station name appears on the display. (European model only)
3 Adjust the volume.
Press VOLUME +/.
To stop automatic scanning
Press .
To change the AM tuning interval
The factory setting for AM tuning interval is 9 kHz (or 10 kHz, for some areas, this function is not available on the European and Russian models).
Use buttons on the unit.
1Press TUNER/BAND on the unit repeatedly to select “AM.”
2Press /to turn off the system.
3Press DISPLAY to display the clock.
4While the clock is displayed, hold down TUNER/BAND and then press /to turn on the system.
“AM 9k Step” or “AM 10k Step” appears in the display.
When you change the interval, all the AM preset stations are erased.