About DVD VIDEO software types and the conversion method

The DVD VIDEO software can be divided into 2 types:

Film-based software

Film-based software is derived from film and displays the images at 24 frames per second.

Video-based software Video-based software is derived from TV, such as dramas and sitcoms and displays images at 30 frames or 60 fields per second.

Some DVD VIDEO contains both types of software. In order for these images to appear in your TV naturally when the video output is in progressive format, the progressive signals need to be converted to match your DVD VIDEO software.

Note

There would be no image on your TV or the image is not clear if your setting does not match your TV or connection.

When using a TV

Turn on the TV and select the video input so that you can view the pictures from this system.

Operating a Sony TV

You can use the following buttons to operate a Sony TV. These buttons have been marked in orange.

To

Press

Turn the TV on

TV /while

or off

holding down TV

 

Switch the TV’s

TV/VIDEO

input source

while holding down

between the TV

TV

and other input

 

sources

 

Select the TV

TV CH +/

channels

or numeric

 

buttons * while

 

holding down TV

 

Adjust the

TV VOL +/

volume of the TV

while holding down

speaker(s)

TV

*For double digit number, hold down TV and press -/-- , then press the number. (For example, hold down TV ,

press -/-- , then 2 and 5 for entering 25.)

22GB