sRGB mode

The sRGB color setting is an industry standard color space protocol designed to correlate the displayed and printed colors of sRGB compliant computer products. To adjust the colors to the sRGB profile, simply select the sRGB mode in the COLOR menu. However, in order to display the sRGB colors correctly (γ =2.2, 6500K), you must set your computer to the sRGB profile and adjust the brightness ( ) and contrast (6) to the numbers shown in the menu. For information on how to change the brightness

( ) and contrast (6), see page 9.

Note

Your computer and other connected products (such as a printer), must be sRGB compliant.

COLOR

 

 

 

 

 

 

 

EASY

 

EXPERT

 

s RGB

 

 

 

 

 

 

 

 

: 5 6

 

: 7 6 FOR

 

s RGB

 

 

COLOR

 

 

 

 

RE TURN

ON

 

 

 

 

 

 

 

 

Restoring the color from the EASY or sRGB menus

The colors of most display monitors tend to gradually lose brilliance over several years of service. The COLOR RETURN feature found in the EASY and sRGB menus allows you to restore the color to the original factory quality levels. The explanation below explains how to restore the monitor’s color from the EASY menu.

1Press the </, buttons to select EASY or sRGB mode.2First press the m/M buttons to select (COLOR RETURN), then press the , button.

The picture disappears while the color is being restored (about 2 seconds). After the color is restored, the picture reappears on the screen again.

Notes

•Before using this feature, the monitor must be in normal operation mode (green power indicator on) for at least 30 minutes. If the monitor goes into power saving mode, you must return the monitor to normal operation mode and wait for 30 minutes for the monitor to be ready. You may need to adjust your computer’s power saving settings to keep the monitor in normal operation mode for the full 30 minutes. If the monitor is not ready, the following message will appear.

COLOR

EASY

EXPERT

s RGB

 

 

 

5 0 0 0 K 6 5 0 0 K 9 3 0 0 K

5 0 0 0 K

COLOR

RE TURN

AVA I L AB L E

A F T ER WARM UP

•The monitor may gradually lose its ability to perform this function due to the natural aging of the picture tube.

Additional settings (OPTION)

You can manually degauss (demagnetize) the monitor, change the menu position, and lock the controls.

1Press the button.

The main MENU appears on the screen.

2Press the m/M buttons to highlight OPTION and

press the button again.

The OPTION menu appears on the screen.3Press the m/M buttons to select the desired adjustment item.Adjust the selected item according to the following instructions.Degaussing the screen

The monitor is automatically demagnetized (degaussed) when the power is turned on.

To manually degauss the monitor, first press the m/Mbuttons to select (DEGAUSS). Then press the , button.

The screen is degaussed for about 2 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

US

Changing the menu’s positionChange the menu’s position if it is blocking an image on the screen.To change the menu’s on-screen position, first pressthe m/M buttons to select (OSD H POSITION) for

horizontal adjustment, or (OSD V POSITION) for vertical adjustment. Then press the </, buttons to shift the on-screen menu.

Locking the controlsTo protect adjustment data by locking the controls, first

press the m/M buttons to select (CONTROL LOCK). Then press the , button to select ON.

Only the 1(power) switch, EXIT, and (CONTROL LOCK)of the OPTION menu will operate. If any other items areselected, the mark appears on the screen.To cancel the control lockRepeat the procedure above and set (CONTROL LOCK) to OFF.

13