Getting Started
Before using this monitor, please make sure that the following items are included in your package: Multiscan 100ES/200ES monitor (1), power cord (1), “Windows Monitor Information Disk” (1), and this operating instruction manual (1).
This monitor will sync with any IBM or compatible system equipped with VGA or greater graphics capability. Although this monitor will sync to other platforms running at horizontal frequencies between 30 and 70 kHz, including Macintosh and Power Macintosh system, a cable adapter is required. Please consult your dealer for advice on which adapter is suitable for your needs.
Step 1: With the computer switched off, attach the video signal cable to the video output.
IBM or compatible computer
to video output
Macintosh or compatible computer
to video output
Macintosh adapter (not supplied)
Step 2: Attach the power cord to the monitor and the other end to a power outlet.
Power cord (supplied)
to a power outlet
Step 3: Turn on the monitor and computer.
Step 4: If necessary, adjust the user controls according to your personal preference.
The installation of your Multiscan 100ES/200ES is complete. Enjoy your monitor.
1)VGA is a trademark of IBM Corporation.
2)VESA is a trademark of the
3)Macintosh is a trademark of Apple Computer Inc.
4)Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
Using Your Monitor
Preset and User Modes
The Multiscan 100ES/200ES has factory preset modes for the 8 most popular industry standards for true “plug and play” capability. For less common modes, the Multiscan 100ES/200ES’s Digital Multiscan Technology will perform all of the complex adjustments necessary to ensure a high quality picture for any timing between 30 and 70Ê kHz.
CPD-100ES/100EST and CPD-200ES/200EST
No. | Resolution | Horizontal | Vertical | Graphics |
| (dots ⋅ lines) | Frequency | Frequency | Mode |
|
|
|
|
|
1 | 640 ⋅ 480 | 31.5 kHz | 60 Hz | VGA 1) Graphic |
2 | 640 ⋅ 480 | 43.3 kHz | 85 Hz | VESA 2) |
3 | 800 ⋅ 600 | 46.9 kHz | 75 Hz | VESA 2) |
4 | 800 ⋅ 600 | 53.7 kHz | 85 Hz | VESA 2) |
5 | 832 ⋅ 624 | 49.7 kHz | 75 Hz | Macintosh 3) |
|
|
|
| 16" Color |
|
|
|
|
|
6 | 1024 ⋅ 768 | 60.0 kHz | 75 Hz | VESA 2) |
7 | 1024 ⋅ 768 | 68.7 kHz | 85 Hz | VESA 2) |
8 | 1280 ⋅ 1024 | 64.0 kHz | 60 Hz | VESA 2) |
For customers using Windows 4)95/98
To maximize the potential of your monitor, install the new model information file from the supplied Windows Monitor Information Disk onto your PC.
This monitor complies with the “VESA DDC” Plug & Play standard. If your PC/graphics board complies with DDC, select “Plug & Play Monitor (VESA DDC)” or this monitor’s model name as the monitor type in the “Control Panel” of Windows 95/98. If your PC/graphics board has difficulty communicating with this monitor, load the Windows Monitor Information Disk and select this monitor’s model name as the monitor type.
Recommended horizontal timing conditions
Horizontal sync width should be: >1.0 ∝sec.
Horizontal blanking width should be: >3.6 ∝sec. (Multiscan 100ES)/ >3.0 ∝sec. (Multiscan 200ES).
Vertical sync width should be: < 560 ∝sec.
Note
4
