Setting the Color Temperature
The selected color temperature becomes the common setting for all input signals.
1 Press the COLOR button.
The “COLOR TEMPERATURE” OSD appears.
COLOR
COLOR TEMPERATURE VAR I ABLE
5000K 9300K 50 
2 Adjust with the > ?//and ¨ >/.buttons.
To select 5000K or 9300K
Press the > ?//buttons.
The selected color temperature is indicated in yellow.
Resetting the Adjustment Data to Factory-preset Levels
To reset an adjustment item
Press the button of the adjustment item you want to reset, and then press the RESET button before the OSD (On Screen Display) disappears.
To reset all adjustment data at once (for the received signal)
Press the RESET button when no OSD is shown.
RESET
?. . . to select 5000K /. . . to select 9300K
To obtain the desired color temperature between 5000K and 9300K
Press the ¨ >/.buttons.
>. . . for higher temperature
.. . . for lower temperature
Your most recent adjusted color temperature will be recalled by pressing the ¨ >/.button.
To erase the “COLOR TEMPERATURE” OSD, press the COLOR button again.
The “COLOR TEMPERATURE” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
To reset all adjustment data to factory- preset levels
Press and hold the RESET button for more than 2 seconds. All adjustment data are reset to
RESET
Note
If you have difficulties pressing the reset button, please use a pointed object (e.g. a pen).
EN
7
