Adjustments

When one of the preset-type signals is input, no picture adjustment is necessary.

You can, however, adjust the picture to your preferences by following the procedure described below.

You can adjust all items on the OSD (On Screen Display).

pBefore adjusting the items, turn on the unit and feed the video signal from the connected computer/work station.

pAdjustments will be stored automatically.

Control Panel

RESET

COLOR

GEOM

SIZE

CENTER

Adjusting the Picture Contrast		Adjusting the Picture Centering
The adjustment data becomes the common setting for all input		The adjustment data becomes the individual setting for each
signals.		input signal received.
1 Press the >?//button.		1 Press the CENTER button.
The “BRIGHTNESS/CONTRAST” OSD appears.		The “CENTER” OSD appears.

For vertical adjustment

Press the ¨ >/.buttons.

2 Press the > ?//buttons to adjust picture contrast.

/. . . for more contrast ?. . . for less contrast

The “BRIGHTNESS/CONTRAST” OSD disappears approxi- mately 3 seconds after you release the buttons.

To reset, press the RESET button while the OSD is on.

>. . . to move up

.. . . to move down

The adjustment data becomes the common setting for all input signals.

1 Press the ¨ >/.button.

The “BRIGHTNESS/CONTRAST” OSD appears.

Horizontal Vertical frequency∗ frequency∗

.. . . for less brightness >. . . for more brightness

The “BRIGHTNESS/CONTRAST” OSD disappears approxi- mately 3 seconds after you release the buttons.

To reset, press the RESET button while the OSD is on.

?. . . to move left /. . . to move right

To erase the “CENTER” OSD, press the CENTER button again.

The “CENTER” OSD automatically disappears 10 seconds after you release the buttons.

To reset, press the RESET button while the OSD is on.

∗The horizontal and vertical frequencies for each input signal received appear on the “BRIGHTNESS/CONTRAST” OSD.