Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse.

MENU

RESET

INPUT 1 2

1 (power) indicator

If the 1 (power) indicator is green1Disconnect the video input cable or turn off the connected computer.2Press the 1 (power) button twice to turn the monitor off and then on.

3Move the control button ,for 2 seconds before the monitor enters power saving mode.

MENU

If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cable and check the condition of your computer.

If the color bars do not appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orangePress the 1 (power) button twice to turn the monitor off and then on.

If the 1 (power) indicator lights up green, the monitor is working properly.

If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between orange flashes of the 1 (power) indicator and inform your authorized Sony dealer of the monitor’s condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and graphic board.

Specifications

CRT

0.24 mm aperture grille pitch (center)

 

 

19 inches measured diagonally

 

 

90-degree deflection

 

 

FD Trinitron

 

Viewable image size

Approx. 365 × 274 mm (w/h)

 

 

(14 3/8 × 10 7/8 inches)

 

 

18.0" viewing image

 

Resolution

 

 

Maximum

Horizontal: 1800 dots

 

 

Vertical: 1440 lines

 

Recommended

Horizontal: 1280 dots

 

 

Vertical: 1024 lines

 

Standard image area

Approx. 352 × 264 mm (w/h)

 

 

(13 7/8 × 10 1/2 inches)

 

Deflection frequency*

Horizontal: 30 to 107 kHz

 

 

Vertical: 48 to 120 Hz

 

AC input voltage/current

220 to 240 V, 50 – 60 Hz, 1.0 A

 

Power consumption

140 W

 

Operating temperature

10°C to 40°C

 

Dimensions

Approx. 446 × 464 × 461 mm

 

 

(w/h/d) (17 5/8 × 18 3/8 × 18 1/4

 

 

inches)

 

Mass

Approx. 26 kg (57 lb 5 oz)

 

Plug and Play

DDC1/DDC2B/DDC2Bi/GTF

 

GB

Supplied accessories

See page 6

 

*Recommended horizontal and vertical timing condition

•Horizontal sync width should be more than 1.0 µsec.

•Horizontal blanking width should be more than 3.0 µsec.

•Vertical blanking width should be more than 500 µsec.

Design and specifications are subject to change without notice.

19