Sony CPD-G400P Identifying parts and controls, Rear, Front, Pin No, Signal, 1RESET button (page 15), 3Control button (page 10), 5AC IN connector (page 7)

Identifying parts and controls

See the pages in parentheses for further details.
Front	Rear
	MENU
RESET	INPUT 1 2
	(HD15)	(HD15)
	1	2
	AC IN
	MENU
RESET	INPUT 1 2

1RESET button (page 15)

This button resets the adjustments to the factory settings.

2INPUT (input) switch (page 8)

This switch selects the INPUT 1 (video input 1 connector: y1) or INPUT 2 (video input 2 connector: y2).

3Control button (page 10)

The control button is used to display the menu and make adjustments to the monitor, including brightness and contrast adjustments.

41 (power) switch and indicator (pages 7, 16, 19)

This button turns the monitor on and off. The power indicator lights up in green when the monitor is turned on, and either flashes in green and orange, or lights up in orange when the monitor is in power saving mode.

5AC IN connector (page 7)

This connector provides AC power to the monitor.

6Video input 1 connector (HD15) (y1) (page 6)

This connector inputs RGB video signals (0.700 Vp-p, positive) and sync signals.

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

Pin No.	Signal
1	Red
2	Green
	(Sync on Green)
		GB
3	Blue
4	ID (Ground)
5	DDC Ground*
6	Red Ground
7	Green Ground
8	Blue Ground
9	—
10	Ground
11	ID (Ground)
12	Bi-Directional Data (SDA)*
13	H. Sync
14	V. Sync
15	Data Clock (SCL)*

* DDC (Display Data Channel) is a standard of VESA.

7Video input 2 connector (HD15) (y2) (page 6)

This connector inputs RGB video signals (0.700 Vp-p, positive) and sync signals.

See the above table for the pin assignment.

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

5