6Press the +/– buttons until the screen color becomes uniform.

Adjustsothattheverticalstripesdisappear.

Customizing Your Monitor

Adjusting the Picture Position

If the picture is not in the center of the screen, press the AUTO button. If this operation does not work, adjust the centering as follows.

Once the centering is adjusted, it will be stored in memory for the current input signal.

1Start the Utility Disk and display the test pattern.

Dosteps2and3of“EliminatingFlickeringorBlurring

Manually.”

7Press the MENU button.

TheMENUOSDappears.

Ifhorizontalstripesareobservedovertheentirescreen,

adjustthePhaseinthenextstep.

8Press the ˘/³buttons to select PHASE, and press the

MENU button again.

ThePHASEOSDappears.

PHASE

2Press the MENU button.

TheMENUOSDappears.

MENU

MENU OKMENU

EXIT

PHASE

PITCH

CENTER

ZOOM/SMOOTHING

COLOR

LANGUAGE GB OPTION

MENU

4

9Press the +/– buttons until the screen color becomes uniform.

Adjustuntilthehorizontalstripesareataminimum.

3Press the ˘/³buttons to select CENTER, and press the MENU button again.

TheCENTEROSDappears.

CENTER

H

MENUV

26

10When you have finished, click [END] on the screen to turn off the test pattern.

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button twice.

4Move the picture up, down, left, or right until the frame at the perimeter of the test pattern disappears.

For horizontal adjustment, select H using the ˘/³ buttons and adjust the position using the +/–

buttons.

+...tomovethepictureright

–...tomovethepictureleft

CENTER

H

V

26

Continued

11