Sony CPD-L181A Step 1: Connect the monitor to the, computer, Step 2: Connect the power cord, Connecting to an IBM PC/AT or compatible computer, Connecting to a Macintosh

Getting Started

Setup

Before using this monitor, check that the following items are included in your carton:

•LCD monitor (1)

•Rear cover (1)

•Power cord (1)

•AC adapter (1)

•HD15 video signal cable (1)

•Macintosh adapter (1)

•Windows Monitor Information Disk/Utility Disk (1)

•Macintosh Utility Disk (1)

•Warranty card (1)

•These operating instructions (1)

Step 1: Connect the monitor to the

computer

Turn off the monitor and computer before connecting.

Connecting to an IBM PC/AT or compatible computer

to …1 or …2

IBM PC/AT or
compatible		HD15 video
computer
	to monitor output	signal cable
		(supplied)

If your PC system is not compatible with Plug & Play (DDC2B and DDC2Bi)

This monitor uses the No. 9 pin in the video signal connector for Plug & Play (DDC2B and DDC2Bi) compatibility. See page 20 for the location of the No. 9 pin.

•If your computer accepts the No. 9 pin, use the supplied HD15 video signal cable.

•If your computer does not accept the No. 9 pin, please consult your dealer for advice on obtaining an HD15 adapter.

Connecting to a Macintosh

Use the supplied Macintosh adapter.

to …1 or …2

Macintosh or		HD15 video
compatible computer
	to monitor output	signal cable
		(supplied)

Macintosh adapter (supplied)*

*Connect the supplied Macintosh adapter to the computer before connecting the cable. This adapter is compatible with Macintosh LC, Performa, Quadra, Power Macintosh and Power Macintosh G3 series computers (sold before January, 1999). If you are connecting to a Power Macintosh G3 series that sold after January 1999, you will need a different adapter (not supplied). Macintosh II series and some older versions of PowerBook models may need an adapter with micro switches (not supplied).

Step 2: Connect the power cord

With the monitor and computer switched off, connect one end of the power cord to the AC power adapter, and the AC power adaptor to the monitor. Then connect the other end of the power cord to a power outlet.

to DC IN

to a power outlet
Power cord	AC power
(supplied)	adapter
	(supplied)

6