Shooting images

By connecting the Cyber-shot Station to a TV, you can shoot an image while checking it on the big screen.

1Set the mode dial of the camera to the position you desire and turn on the camera.

For further details, see the operating instructions supplied with the camera.

2Adjust the camera angle using the rotating base of the Cyber-shot Station.

Shooting an image with the remote control

3Press the SHUTTER button of the remote control.

You cannot press the SHUTTER button halfway down.

Taking time-lapse photos by Interval Shot

3Set shooting interval using the interval selector of the Cyber-shot Station.

You can choose the shooting interval from 5 minutes, 30 minutes or 60 minutes.

4Press the INTERVAL SHOT button.

When you press the INTERVAL SHOT button, the camera will be turned off and interval shooting (time-lapse shooting) will start. Then the Interval Shot lamp will blink green.

When the camera is turned on, the Interval Shot lamp now blinks red.

When the shooting is completed, the Interval Shot lamp remains red for five seconds. The camera is soon turned off to start blinking green again.

5Finish interval shooting.

Interval shooting will finish automatically when the 12 times of shooting has completed, and then the Interval Shot lamp will go off.

You can also quit interval shooting in the following ways.

–Press the INTERVAL SHOT button again.

–Change the interval time.

–Remove the camera from the Cyber-shot Station.

•When you set the camera for interval shooting, the shooting will be repeated 12 times in spite of the conditions of the camera. Make sure that the camera is ready for the shooting before you start interval shooting. For further details, see the operating instructions supplied with the camera.

•During interval shooting, the camera is turned off each time an image is shot. For this reason, zoom and self-timer will return to the default settings.

•You cannot use the remote control, while the interval shooting is in process.

10-GB