Charging the battery

Viewing images on a TV

pack

screen

Place the camera with the battery pack inserted on the Cyber-shot Station.

Charging starts automatically. Both the / CHG lamp of the camera and the CHARGE lamps of the Cyber-shot Station light up.

Battery level: LOW

Battery level: MIDDLE

Battery level: HIGH

•The light starts coming on from the left.

•It might take a few seconds for showing an accurate battery level.

•The battery level will be displayed in three levels on the CHARGE lamps of the Cyber- shot Station while charging the battery pack. When charging is completed, the CHARGE lamps go off.

–When charging the battery pack, make sure the camera is turned off.

1Connect the A/V connecting cable (supplied) to the A/V OUT (MONO) jack of the Cyber-shot Station and the audio/ video input jacks of the TV.

A/V connecting cable

If your TV provides stereo input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio jack.

–Turn off both camera and TV before connecting the Cyber-shot Station and the TV by the A/V connecting cable.

2Set the mode dial of the camera to .

3Turn on the power with the remote control.

4Turn on the TV and set the TV/Video switch to “Video”.

5Press b/B on the Control buttons of the remote control to select the desired image.

–You can also select the image by pressing b/B on the Control buttons of the camera.

–The Cyber-shot Station is compatible with both NTSC and PAL TV systems. For further details, see the operating instructions supplied with the camera.

9-GB