Viewing images on a TV

screen

1Connect the A/V connecting cable (supplied) to the A/V OUT (MONO) jack of the Cyber-shot Station and the audio/ video input jacks of the TV.

A/V connecting cable

If your TV provides stereo input jacks, connect the audio plug (black) of the A/V connecting cable to the left audio jack.

–Turn off both the camera and the TV before connecting the Cyber-shot Station and the TV with the A/V connecting cable.

2Set the DISPLAY SELECT switch to “TV”.

–Images will not be displayed on the screen of the camera.

3Set the mode switch of the camera to , and turn on the power by pressing the POWER button on the Cyber-shot Station or the remote control.

4Turn on the TV and set the TV/Video switch to “Video”.

5Press b/B on the Control buttons of the remote control to select the image.

You can also select the image by pressing b/B on the Control buttons of the camera.

–When using the Cyber-shot Station with

the DSC-N1, use / on the remote control.

–The Cyber-shot Station is compatible with both NTSC and PAL TV systems. For further details, see the operating instructions supplied with the camera.

Slide Show

You can playback a series of still images and movies recorded with your camera by only pressing the SLIDE SHOW button on the remote control or the Cyber-shot Station.

1Set the mode switch of the camera to , and turn on the power by pressing the POWER button on the Cyber-shot Station or the remote control.

2Press the SLIDE SHOW button on the remote control or the Cyber-shot Station.

To cancel Slide Show

Press the SLIDE SHOW button on the remote control or the Cyber-shot Station again.

•You can change the settings of Slide Show ([Interval], [Image], and [Repeat] etc.) with the settings on the camera. For further details, refer to the operating instructions supplied with the camera.

12-GB