Printing still images

Even if you do not have a computer, you can easily print still images by connecting your camera via the Cyber-shot Station to a PictBridge compliant printer.

•Refer to the operating instructions supplied with the camera for details on the printer settings, such as the number of printing images, paper size, and USB setting.

•The available print functions may differ depending on the printer.

1Turn on your camera.

2Set the USB mode on your camera.

–For further details, refer to the operating instructions supplied with the camera.

3Connect the Cyber-shot Station to your printer by using the supplied USB cable.

USB cable

After the connection is established, the image select screen appears.

*About the image select, refer to the operating instructions supplied with the camera.

When the Cyber-shot Station is communicating with your printer using the USB cable, do not remove the camera from the Cyber-shot Station. Removing the camera may damage the image data.

For further details, refer to the operating instructions supplied with the camera.

4Press the PRINT button.

The print setting screen appears.

* If you are using the DSC-N1, the image

select screen disappears at this point. Press the Print button again.

*The setting screen images shown below are from the DSC-N1.

Print

Quantity 1

Date

Off

Size

Default

OK

–Setting items that the printer does not support cannot be displayed.

5 Select [OK] with V/B, then press .

The image is printed.

Printing

Exit

–When printing is completed, the screen returns to the previous screen.

–Do not disconnect the USB cable while

the (Not disconnect USB cable) indicator is displayed on the screen.

To cancel printing

Select [Exit] in step 5.

13-GB