Set up

Preparing the Cyber-shot Station

Remove the caution sheet before using the Cyber-shot Station for the first time.

1Select the Adaptor plate.

Use the Adaptor plate designated for your camera. See the mark on the Adaptor plate and select one as followed by the list below.

Adaptor plate for

DSC-T5

Adaptor plate for

DSC-N1

Adaptor plate for

DSC-T9

2Attach the Adaptor plate.

Attach the Adaptor plate to the Cyber-shot Station upright until it clicks.

–Be sure to attach the designated Adaptor plate before using the Cyber-shot Station.

–Using the Cyber-shot Station without attaching the Adaptor plate may cause a malfunction.

3Connect the AC Adaptor to the DC IN jack of the Cyber-shot Station.

 

Cyber-shot

 

Station

 

DC plug

 

AC Adaptor

 

To a wall

 

outlet

AC Power cord

(wall socket)

 

(mains lead)

 

To remove the Adaptor plate

Slide the EJECT switch on the Cyber-shot Station (1) and lift the Adaptor plate upright (2).

To use your Cyber-shot Station abroad - Power sources

You can use the Cyber-shot Station and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC 50/60 Hz.

Use a commercially available AC plug adaptor, if necessary, depending on the design of the wall outlet (wall socket).

AC plug adaptor (not supplied)

Do not use an electronic transformer (travel converter), as this may cause a malfunction.

9-GB