Sony DAV-FX100W Unpacking, Inserting Batteries into, the Remote, 13US, Getting, Getting Started, •Bases (4), •Screws (20), •Speakers (5), on the system, •Subwoofer (1)

Getting Started

Unpacking

Check that you have the following items:•Speakers (5)•Subwoofer (1)• Posts (long ⋅ 4, short ⋅ 4)•Bases (4)•Terminal covers (4)•Screws (20)•Surround amplifier (1)•IR transmitter* (1)•IR receiver* (1)•IR receiver stand (1)•Speaker base (1)•AM loop antenna (aerial) (1)•FM wire antenna (aerial) (1)•Speaker cords (5 m ⋅ 6)(16.5 ft. ⋅ 6)•Video Cord (1)•Remote Commander (remote) (1)•Size AAA (R03) batteries (2)•Wall-mount pads•Operating Instructions•Speaker and TV connections (card) (1)

*The cords of the IR transmitter and IR receiver are for this system only. You cannot use a commercially available extension cord.

Inserting Batteries into
the Remote	Getting
You can control the system using the supplied
remote. Insert two size AAA (R03) batteries by	Started
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the system.

1Slide open the cover.

2

2Remove the cover by pinching the sides.

Note

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

13US