Sony DAV-FX100W Step 8: Performing the Quick Setup, 36US, 2 Press [/1, 1 Turn on the TV, 4 Press ENTER without inserting a disc, •Make sure that the function is set to “DVD.”

Stand

Troughs

Note

•Use screws suitable for the material and strength of the wall.•Do not install the IR transmitter or IR receiver to a wall of low strength.

•Sony is not liable for any damage or accident incurred by incorrect installation (i.e. low strength wall, etc.), incorrect use of this product, or natural disaster.

•When connecting/disconnecting cords, detach the IR transmitter or IR receiver from the wall first.

Step 8: Performing the Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the system.

To skip an adjustment, press >. To return to the previous adjustment, press ..

"/1

./>

X/x

ENTER

CLEAR

With cover opened.

1 Turn on the TV.2 Press [/1.

Note

•Disconnect the headphone when you perform the Quick Setup. You cannot operate steps after 8 with the headphone connected.

•Make sure that the function is set to “DVD.”

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the screen. If this message does not appear, display the Quick Setup and perform again (page 38).

Note

•When you press CLEAR in message, the message disappears. When you need to perform the Quick Setup, see “To recall the Quick Setup display” (page 38).

4 Press ENTER without inserting a disc.

36US