Sony DAV-FX100W 21US, Started Getting, To connect the speaker cords, Avoiding short-circuitingthe speakers

Note

•Do not set the speakers in an inclined position.

•Do not place the speakers in locations that are:

–Extremely hot or cold

–Dusty or dirty

–Very humid

–Subject to vibrations

–Subject to direct sunlight

•Use caution when placing the speakers and/or speaker stands (not supplied) that are attached with the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result.

•When cleaning, use a soft cloth such as a cleaning cloth for glasses.

•Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.

•Do not lean or hang on the speaker, as the speaker may fall down.

Notes on placing IR transmitter and IR receiver

•Do not install the IR receiver in a place exposed to direct sunlight or strong light such as an incandescent lamp.

•The cords of the IR transmitter and IR receiver are for this system only. You cannot use a commercially available extension cord.

Notes on placing the surround amplifier and speaker base

•Do not step and place objects other than supplied speakers on the surround amplifier and speaker base.

•When you install the speaker on the surround amplifier or speaker base, make sure the speaker is properly stacked.

To connect the speaker cords

Connect the speaker cords after bending the bare wire at the end of the insulation. This prevents the speaker insulation from being inserted in the speaker terminal.

Started Getting

Note

• Do not catch the speaker cord insulation in the SPEAKER jack.

Avoiding short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch another speaker terminal or the bare wire of another speaker cord.

21US