Step 7: Adjusting the

Wireless System

After connecting the speakers, surround amplifier, IR transmitter, IR receiver, and the AC power cords (mains leads), adjust the wireless system for good transmission.

"/1

POWER/

ON LINE indicator POWER

POWER/ON LINE

POWER

1 Press "/1 on the system and POWER on the surround amplifier.

The system and surround amplifier turn on and the POWER/ON LINE indicator turns red.

2 Orient the IR transmitter and IRreceiver to face each other.Adjust the position until the POWER/ON LINE indicator turns green.

• The IR transmitter is movable for easy reorientation.

Note

•Make sure that there is no obstruction such as a person or object between the IR transmitter and the IR receiver. Otherwise, the sound from the surround speakers may be interrupted.

•If the POWER/ON LINE indicator turns red, the transmission is incomplete. Adjust the position of the IR transmitter and IR receiver until the POWER/ON LINE indicator turns green.

•If the POWER/ON LINE indicator flashes in red, the IR receiver is receiving an infrared ray from another Sony’s wireless product. Move the IR transmitter and/or the IR receiver so that the POWER/ON LINE indicator turns green.

Example for installationPosition the IR transmitter and IR receiver as illustrated.

Install the IR transmitter and IR receiver in direct line with each other, and adjust the orientation of the IR transmitter and IR receiver until the POWER/ON LINE indicator turns green.

Top view

IR transmitter

Front

Center speaker

Front

speaker (L)

speaker (R)

 

TV

 

Subwoofer

Listening position

Surround

Surround

speaker (L)

speaker (R)

Surround amplifier

Speaker base

IR receiver

Hanging the IR transmitter and IR receiver on a wallYou can hang the IR transmitter and IR receiver on a wall when:–there is an obstruction between the IR transmitter and the IR receiver.–people often pass between the IR transmitter and the IR receiver.

When hanging both the IR transmitter and IR receiver, adjust the position of the IR transmitter after deciding the position of the IR receiver.

34US