Custom Settings

[CUSTOM SETUP]

Use this to set up playback related and other settings.

Select [CUSTOM SETUP] in the Setup Display. To use the display, see “Using the Setup Display” (page 81).

The default settings are underlined.

 

 

 

CUSTOM SETUP

 

 

 

 

 

PAUSE MODE:

AUTO

 

 

 

 

TRACK SELECTION:

OFF

 

 

 

 

MULTI-DISC RESUME:

ON

 

 

 

 

AUDIO (HDMI):

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

x[PAUSE MODE] (DVD VIDEO/DVD-RW only)

Selects the picture in pause mode.

[AUTO]

The picture, including subjects

 

that move dynamically, is output

 

with no jitter. Normally select this

 

position.

 

 

[FRAME]

The picture, including subjects

 

that do not move dynamically, is

 

output in high resolution.

 

 

x[TRACK SELECTION] (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, MPEG audio, or Dolby Digital format) are recorded.

[OFF]

No priority given.

 

 

[AUTO]

Priority given.

 

 

Note

•When you set the item to [AUTO], the language may change. The [TRACK SELECTION] setting has higher priority than the [AUDIO] settings in [LANGUAGE SETUP] (page 82). (Depending on the disc, this function may not work.)

•If PCM, DTS, Dolby Digital sound, and MPEG audio tracks have the same number of channels, the system

selects PCM, DTS, Dolby Digital sound, and MPEG audio tracks in this order.

x[MULTI-DISC RESUME] (DVD VIDEO/ VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback point can be stored in memory for up to 40 different DVD VIDEO/ VIDEO CD discs (page 41).

[ON]

Stores the resume settings in

 

memory for up to 40 discs.

 

 

[OFF]

Does not store the resume settings

 

in memory. Playback restarts at

 

the resume point only for the

 

current disc in the system.

 

 

xAUDIO (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

[OFF]

The sound is not output from the

 

HDMI OUT jack.

 

 

[AUTO]

Outputs audio signals that is

 

matched to the requested audio

 

stream from the connected TV.

 

 

[PCM]

Converts Dolby Digital, DTS

 

(digital theater system), or 96

 

kHz/24 bit PCM (pulse code

 

modulation) signals to 48 kHz/ 16

 

bit PCM (pulse code modulation).

 

 

Note

•A loud noise (or no sound) will be output if you connect the system to a TV that is not compatible with DOLBY DIGITAL/DTS (digital theater system) signals and [AUTO] is selected. In this case, select [PCM].

•When you connect the system and TV with the HDMI cord and [AUTO] or [PCM] is selected, DUAL MONO, AUDIO DRC, A/V SYNC, DSGX, and sound field functions are not applied to the sound that is output from the TV.

Adjustments and Settings

85US