Step 3: TV and Video Component Hookups
Required cords
SCART (EURO AV) cord for connecting a TV (not supplied)Audio/video cords (not supplied)When connecting a cord, be sure to match the
Yellow (Video)
White (L/audio)
Red (R/audio)
Terminals for connecting video componentsConnect the | To the |
TV | T EURO AV OUTPUT (TO TV) jack |
|
|
VCR | VIDEO 1 jacks |
|
|
Digital satellite receiver | VIDEO 2 jacks |
|
|
Connect the system to your TV using the SCART (EURO AV) cord. Be sure to connect the SCART (EURO AV) cord to the T EURO AV OUTPUT (TO TV) jack on the system.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the operating instructions supplied with the TV to be connected.
Note
When you use the VIDEO 1 line outputs, please set the system to 2CH STEREO mode. If the system is not in 2CH STEREO mode, the line outputs may not function properly.